This is default featured slide 1 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 2 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 3 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Friday, June 26, 2009

new porsche carrera



The New Porsche Carrera GT Car is powered by a 5.7 litre V10 engine producing 612 DIN (605 SAE) horsepower (450 kW) whereas the original concept car featured a 5.5 litre version rated at 558 hp (416 kW). New Porsche Carrera GT Car claims it will accelerate from 0 to 100 km/h (62.1 mph) in 3.9 seconds and has a maximum speed of 330 km/h (205 mph), although road tests indicated that in reality the car could accelerate from 0-60 mph in 3.5 seconds and 0-100 mph in 6.8 seconds, while 0-125 mph in 9.9.
The New Porsche Carrera GT Car has a basic five color paint scheme which includes Guards Red, Fayence Yellow, Basalt Black, GT Silver and Seal Grey. Custom colors were also available from the factory. A traditional six-speed manual transmission is the only available transmission, in contrast to its rival the Enzo Ferrari which is only offered with a computer actuated paddle shifted manual gearbox. Attached to this gearbox is a beechwood gearknob which pays homage to the wooden gearknob used in the Porsche 917 Le Mans racers. In its second year of production, a limited edition carbonfibre knob was also made available. With the Enzo Ferrari priced initially around $660,000, the New Porsche Carrera GT Car base price of US$444,400 makes the dream of owning a piece of Le Mans inspired technology somewhat more attainable.
The New Porsche Carrera GT Car is among a rare breed of supercars — exotic, high-performance automobiles that are built for ultimate speed and handling on the road. Its ultra-lightweight, high-tech design places the New Porsche Carrera GT Car among the top of its class. The New Porsche Carrera GT Car is capable of ushering in a new standard in its class with its overall impressive performance with due importance to safety. Key innovative technologies that went into the making of the New Porsche Carrera GT Car include a ceramic composite clutch and brakes beneath the body, a nickel and silicon combination coating improving the wear resistance while minimizing the internal friction of the engine etc. The vehicle comes with a slim trunk that comes handy in holding the stuff for a weekend getaway. Using lightweight materials such as magnesium for the car’s wheels and the frames make the New Porsche Carrera GT Car more swift and dynamic thereby helping it deliver a fabulous performance. Substantial attention to detail has been paid to the design of this uncompromising super sports car.

You never what you’re going to spot when you go for a little joy ride across America. Just moments ago as we crossed from Missouri into Arkansas on Interstate 55, a low slung black car with a big wing rolled by. After a quick double take I grabbed my camera and snapped off a few pics of the first Porsche Carrera GT I’ve ever seen on the street.

new nissan skyline gtr r35



The all-nNissan R35 GTRew 2009 Nissan GT-R is a multi-dimensional performance machine that supremely lives up to the concept of “the ultimate supercar that can be driven by anyone, anytime, anywhere.” Afterall, it did beat the Porsche 997 GT3 (7.38 vs. 7.39 around the Nürburgring in Germany).

Under the hood, the Nissan GT-R features an all-new 3.8-liter twin turbo V6 producing 480 horsepower and 430 lb-ft of torque (estimated). The engine is backed by an all-new, paddle-shifted, GR6-type dual clutch rear transaxle . The new Nissan GT-R is built on an exclusive all-new Premium Midship platform. This new platform enables the use of a world’s first independent rear transaxle ATTESA E-TS all-wheel drive system, which places the transmission, transfer case and final drive at the rear of the vehicle, optimizing weight distribution and maximizing handling capability.

Tuesday, June 16, 2009

new ferrari 599xx




The 79th Geneva International Motor Show provides the venue for Ferrari to announce the world debut of the 599XX which is aimed at a select group of clients. The latter new car incorporates the most advanced technologies resulting from Ferrari’s road-going and F1 research. Many of the technological solutions it carries are being used for the first time and have been developed exclusively for this special car.

The 599XX is aimed at owners that want to experience Prancing Horse driving pleasure at its purest - in fact, Ferrari will be organising a programme of dedicated track events for it in 2010/2011. Conceived exclusively for track but not official competition use, and thus unrestricted either by homologation limitations or regulatory restrictions, this extreme sports car incorporates the very best of Ferrari technology, the fruit both of our Research and Development Department’s labours and our long experience and experimentation in F1. The plethora of aerodynamic, electronic control and handling innovations used together for the first time on a single car make this model a genuine technological laboratory. The solutions adopted for the 599XX – many of which will remain exclusive to it - enhance its levels of performance and can be summed up in one highly relevant statistic: a Fiorano lap time of just 1 minute and 17 seconds. Although it is such an extreme car, the 599XX still retains the ergonomics of the road-going model which are essential for non-professional drivers engaging in intensive track driving.

While based on the 599 GTB Fiorano with the same transaxle layout and engine type, this prototype is an extreme track car. Ferrari’s engineers have carried out extensive work on the engine’s combustion chambers and inlet and exhaust tracts. These modifications, combined with the fact that internal attrition has been reduced and the maximum revs have been boosted to 9,000 rpm, helped achieve the target power output of 700 hp at 9,000 rpm. Particular attention was also paid to cutting the weight of the engine unit components. This was achieved both by optimising forms – as in the new crankshaft – and adopting exclusive materials, as in the carbon-fibre used for the intake plenums. A new gearbox shift strategy cuts overall gearchange times to 60 ms.

The 599XX is characterised by an innovative electronic concept called the “High Performance Dynamic Concept” which has been designed to get the maximum performance from the car by managing the combination of the car’s mechanical limits with the potential of its electronic controls. The mechanical and electronic systems work together to get the maximum performance from the car under extreme high performance driving, for consistent lap times. The sporty handling has been improved thanks to the adoption of second generation SCM suspension system. Track usage is also made easier thanks to the new “virtual car engineer”, a screen in the car that provides a real-time indication of the vehicle’s efficiency.

The 599XX’s aerodynamics were honed in numerous wind tunnel test sessions with the result that the car now boasts 280 kg of downforce at 200 km/h (630 kg at 300 km/h). The front underside of the body is completely faired-in and the vents that channel hot air from the engine bay have been moved to the bonnet.

The “Actiflow™” system increases downforce and/or cuts drag depending on the car’s trim cornering conditions, courtesy of the use of a porous material in the diffuser and two fans in the boot which channel the air flow from under the car out through two grilles next to the tail-lights. Winglets have been added to the rear buttresses to increase downforce. while synthetic jets have also been incorporated into the rear of the car to control and smooth the air flow and to reduce drag.

Ferrari’s engineers have also used F1-derived “doughnuts” which partly cover the brake discs and wheel rim. These have the dual function of improving both aerodynamics and brake cooling.

In terms of the bodywork, composites and carbon-fibre have been widely used and the engineers drew on their experience in working with aluminium to reach the weight target. The development of increasingly high-performance materials has also benefited the carbon-ceramic material braking system. The brake pads are now made from carbon-fibre which means that the callipers are smaller whilst guaranteeing the same efficiency. The new racing carbon ceramic braking system also delivers shorter braking distances and is generally more efficient due to the weight saving.

The 599XX comes with slick tyres (29/67 R19 Front and 31/71 R19 Rear) specifically developed to maximise stability in cornering and increase lateral acceleration. They are fitted to 19 x 11J wheel rims at the front and 19 x 12J at the rear.

new lamborghini preventon




The new Lamborghini Reventon, introduced by Lambo boss, Stephan Winkelmann. Reventon was unveiled today at Frankfurt Auto Show. The new Lambo based on the LP640. The Lamborghini Reventon will costs $1.4 million. Read press-release after jump…

Press Release: The most extreme

The essence of the marque: just 20 examples of a design masterpiece

Clearly a Lamborghini, but nothing quite like it. A super car without equals: the Lamborghini Reventon is a road vehicle with an extreme specification and, at the same time, a limited edition masterpiece - a coherent style, angular with sharp lines, inspired by the very latest aeronautics.

With just 20 produced, each 1 Million Euro (without taxes) Lamborghini Reventon is a symbol of extreme exclusivity, yet still offering the extraordinary performance that makes the Reventon so unrivalled: under the completely autonomous design, the Reventon possesses the entire technical and dynamic competence of the twelve cylinder Lamborghini.

Lamborghini prides itself on being the extraordinary manufacturer of extreme super sports cars without compromise. Sensuality and provocation characterise every Lamborghini, with an aggressively innovative style. “However, the Reventon is the most extreme of all, a true automotive superlative. Our designers at the Lamborghini Style Centre took the technical base of the Murcilago LP640 and compressed and intensified its DNA, its genetic code,” affirms Stephan Winkelmann, President and CEO of Automobili Lamborghini S.p.A.

Born in Sant’Agata Bolognese

The Lamborghini Reventon has been entirely designed in Sant’Agata Bolognese, the original birthplace of the Lamborghini and the native home of every super car born under the sign of the bull. The design drawn up in Lamborghini’s Centro Stile (Style Centre) is fine-tuned in close collaboration with the Lamborghini Research and Development Department. Thus, the Reventon is not only “haute couture” but it also stands out for its elevated dynamism whilst being entirely suitable for every day use.

The Lamborghini Reventon is not destined to remain a one-off. A total of 20 Lamborghini friends and collectors will be able to own this extraordinary car and, naturally, enjoy the incomparable pleasure of driving it.

The name Reventon has been chosen according to Lamborghini tradition. Reventon was a fighting bull, owned by the Don Rodriguez family. It is included in the list of the most famous bulls ever and is known for killing the famed bullfighter Felix Guzman in 1943.

Inspired by the fastest airplanes

The present day Lamborghini models are distinguished by the clear language of their shape. The coherent proportions of the Murci??lago and Gallardo highlight their power and dynamism. Sharp edges, precise lines and clean surfaces: these are ingredients of a style reduced to the essential. Each element is created exactly according to its function; ornaments and decorations are totally foreign to a Lamborghini.

With the Reventon the Centro Stile designers have coherently developed this philosophy, inspired by another sphere where speed and dynamism reign absolute: modern aeronautics, responsible for the fastest and most agile airplanes in the world. This has created an extremely precise, technically striking style with a new vitality: interrupted lines and contorted surfaces create a fascinating play of light, giving the car incredible movement.

Made of carbon fibre and precision

Although it is based on the extraordinarily successful Murcilago LP640, the exterior design of the Reventon is completely new. Just like the base model, the exterior is made of CFC, a composite carbon fibre material, which is as stable as it is light. The exterior components are glued and fixed to the body comprised of CFC and steel.

The front is characterised by the acute angle of the central ‘arrow’ and by the powerful forward-facing air intakes. Although they do not supply air directly to the turbine like an airplane, bearing in mind the 650 hp, an abundant volume of air is necessary to cool the carbon brake disks and the six cylinder callipers.

Characterised by coherent functions

Naturally, both doors on the Reventon open upwards - since the legendary Countach this has also been a symbol of the V12 Lamborghini product line. With their asymmetric configuration, the large air intakes below the doors provide an example of the extreme coherence with which a Lamborghini fulfils its function: on the driver’s side it is large to increase the flow of oil to the radiator. On the passenger’s side of the vehicle, the air intake is flat because in this case, it only has to ensure the flow below the floor. The aerodynamically optimised flat floor structure terminates at the rear with a diffuser featuring an accentuated shape. This guarantees excellent road grip and stability even at 340 km per hour.

In spite of the extreme and innovative language of its shape, the Reventon not only maintains all the strong features of the Murcilago LP640, but also offers further amelioration in terms of aerodynamics, the important engine cooling system, the air intake system and brakes. The airflow and the section of the variable geometry air intakes of the engine and the rear spoiler (also adjustable) have been modified.
Owners of the 20 examples will be able to test the performance of his or her Lamborghini in person.

Perfected to the ultimate detail

The engine hood made of glass laminate with open ventilation slits offers a glimpse of the beating heart of the twelve cylinders of the super car. The glass also features the marked arrow angle that characterises the design from the front to the rear spoiler. The Lamborghini designers’ love for detail is beautifully illustrated by the fuel tank lid: a small mechanical work of art, achieved by milling a solid aluminium block.

The combination lights transform the incisiveness of the design into light: the front features the most modern light-emitting diodes alongside Bi-Xenon headlights. Seven LEDs ensure continuous daylight while there are a further nine diodes for the indicator and hazard lights. Another technical innovation is found in the rear light LEDs. Because of the high temperature in the rear low part of the car, special heatproof LEDs are used for the indicator and hazard lights, stoplights and rear lights with a triple arrow optical effect.

A new body colour

Naturally, such a refined language of shape also demands an extraordinary colour. For the 20 examples of the Revent??n, the designers from Sant’Agata Bolognese have created a totally new hue: Revent??n, a mid opaque green/grey without the usual shine. However, thanks to the metallic particles, in the daylight this colour tone features surprising depth.

Opaque and brilliant colours for the wheel rims
This play of opaque and lustre is also featured on the wheel rims, especially created for the Revent??n. Opaque carbon fins are screwed onto the black aluminium spokes, not only creating a visual effect with the precision of a surgeon’s scalpel, but a turbine effect also ensures optimum cooling for the powerful ceramic brake disks.

TFT display similar to an airplane

The same innovative force applied to the exterior design characterises the cockpit of the Reventon. Designed and created using Alcantara, carbon, aluminium and leather that comply with the top quality standards, the interior is inspired by the next generation cockpits: just like in modern airplanes, the instruments comprise three TFT liquid crystal displays with innovative display modes. At the touch of a button, the driver can choose from two vehicle information display modes. The instruments are housed in a structure milled from a solid aluminium block, protected by a carbon fibre casing.

The G-Force-Meter is also completely new: this display shows the dynamic drive forces, longitudinal acceleration during acceleration and braking, as well as transversal acceleration around bends. These forces are represented by the movement of an indicator on a graduated 3D grid depending on the direction and intensity of the acceleration. A similar instrument can be found in the airplanes. Formula One teams also use a similar device to analyse dynamic forces.

Customisable instruments

The instrument on the left of the speedometer associates the number of revolutions in the form of a luminous column with the display of the selected gear. Finally, every Reventon is equipped with a robotised e.gear controlled by two small levers under the steering wheel.

By simply pressing a button, the driver can switch to the second, quasi-analogical display, where the classic circular instruments, speedometer and engine speed indicator are configured in an equally innovative way and transformed into luminous pilot lamps with varying colours. The G-Force-Meter naturally remains at the centre in this display mode.

Electronic system developed entirely by Lamborghini

All this is possible thanks to the fact that the entire electronic platform of the Reventon, together with all the control devices, has been autonomously developed by the Lamborghini experts.

The same process for integrating the electronic displays in the car was applied to the Lamborghini Engineering Department.

From the conception of the very first radical ideas, the entire Reventon has been developed in Sant’Agata Bolognese thanks to tight teams of remarkably creative experts. An extremely refined and efficient process was employed: CAD design and development, creation of the prototype in the Prototype Department, all carried out under the constant supervision of the Research and Development Department’s technicians and testers.

Atelier of creativity and high efficiency

Inaugurated in 2004, the Centro Stile is dedicated to design and characterised by a high degree of efficiency: an “atelier” of creators, designers and prototype constructors, who encapsulate the Lamborghini culture and spirit by using their remarkable skills to create aesthetic innovation.

The Centro Stile is located in a 2,900 square two-storey building. The large pavilion houses two test floors and related production and analysis equipment, while other rooms are set aside for the most advanced computerised workstations for designers and a style-model construction workshop. The Centro Stile is also closely linked to the nearby Engineering Department: the direct line between the Lamborghini development departments guarantees that ideas rapidly become reality.

Creativity and production under the same roof

The Lamborghini Revent??n is a practical illustration of the streamlined functionality and efficiency characterising the Centro Stile: it took less than a year to progress from the first ideas to the finished car. The complete design process from the first sketches on paper, to three dimensional computer models with 1:10 or 1:4 scale, right up to the real size prototype is organised around streamlined, fast, efficient work groups. Thanks to the Centro Stile, for the first time in its history, Lamborghini is now able to create its own style philosophy in-house without having to rely on any external collaboration.

The 20 units will be manufactured in Sant’Agata, using a production process characterised by artisan perfection and rigorous quality standards.

A masterpiece with tested technology

The technology found in the Murcilago LP640 has not been modified. The engine in the LP640 forwards is the classic twelve-cylinder engine with 6.5 litre displacement. Only for this car, Lamborghini guarantees, an astounding 650 HP (478 kW) at 8,000 revolutions per minute (rpm). The huge torque, equal to maximum 660 Nm, ensures a powerful switch from any number of revolutions: even the slightest pressure on the accelerator is spontaneously transformed into thrust. The robotised e.gear changes gear faster than even the most expert driver. In addition, the permanent Viscous Traction four-wheel drive system ensures that every force is constantly translated into movement.

As in the original Murcilago LP640, the Reventon accelerates from 0 to 100 km/h in just 3.4 seconds, with a maximum speed over 340 km/h.

Born to become a legend

Since its foundation, Lamborghini has been a creator of trends in the world of sports cars and has always manufactured cars with an absolutely unmistakable character. Models such as the Miura or Countach, for example, were veritable forerunners and rapidly acquired the status of timeless classic cars. From the moment they are launched, every new Lamborghini promises to become a legend, destined to become a sought-after and precious possession.

With the Lamborghini Reventon, Lamborghini has done it again; it has created an unequalled super car; the perfect synthesis between the exclusivity and appeal of a limited edition design masterpiece, and the dynamism and driveability of a standard sports car. Thus, the Lamborghini legend is further enhanced by another, stylish future classic.

mobil mewah



Produsen mobil asal Jerman Porsche akan memangkas produksi pada Desember dan Januari 2009 karena terkena dampak dari krisis global eknomi yang membuat permintaan mobil mewah menurun drastis.

Juru bicara Porsche mengatakan, pihaknya telah memperingatkan jika 2009 akan menjadi tahun tantangan global bagi pasar automotif yang terus menurun dan berpotensi memotong produksi lebih lanjut. Karena itu, Porsche mengungkapkan, penjualan saat Natal tahunan akan diperpanjang hingga tiga hari tahun ini. dari 22 Desember hingga 9 Januari.

"Hal ini disebabkan oleh situasi ekonomi global yang semakin sulit, khususnya di Amerika Serikat," ujar juru bicara tersebut. Amerika Utara diakui Porsche sebagai pasar penjualan Porsche terbesar.

Sementara itu, CEO Porsche Wendelin Wiedeking mengatakan awal bulan ini perusahaan membawa laporan pendapatan yang memberikan kebahagiaan bagi para pemegang saham. Porsche mengumumkan pada Oktober pendapatan mereka mencapai 7,5 miliar euro untuk 98 ribu unit mobil yang terjual ke seluruh dunia selama 12 bulan sampai 31 Juli.

Friday, June 12, 2009

new tiburon coupe




Having spent a week in the Hyundai Tiburon recently, I came to one conclusion, although it is a brilliant looking car, it can do with more power and a rear-wheel-drive setup. Thankfully the engineers at Hyundai agree! Say hello to the new Hyundai Rear-Wheel-Drive Tubrocharged Coupe
Details are sketchy so far but reports from Korea indicate two engine choices, a 2.0-liter turbocharged engine with around 160kWs and a 3.8-litre V6 with around 206kWs.

Fortunately the new Tiburon will be, for the first time, rear-wheel-drive! Not only will the Tiburon become the new 200SX, but it most likely skyrocket Hyundai into the serious performance car league!
Reports also suggest the RWD Coupe will be larger than the current Tiburon, estimated to be roughly equivalent to the new Nissan Skyline (G35 Coupe). It will feature a start button, 19″ wheels plus the option for brembo brakes. As you can see from the picture below, the rotors appear gigantic!
Release date is expected around early to mid next year with a the possibility for an Australian arrival within 12 months from then.

Generasi Terbaru BMW Z4




MUNICH - Produsen automotif asal Jerman, BMW kembali memperkenalkan seri Z roadster terbarunya, Z4. Mobil ini kabarnya akan ditampilkan dalam pameran Detroit Auto Show Januari tahun depan.

BMW Z4 tampil dengan desain bodi yang lebih agresif, dan tarikan garis tegas yang mempertegas kesan sporti. Tengok saja penampilan dua grill yang dirancang baru. Front bumper yang yang menekuk di tengah-tengah muka, dipadu dengan lampu yang meruncung, makin memancarkan aura sebuah sport car.

Di belakang juga mendapat perbaikan. Desain stoplamp dan rear bumper dibuat maik agresif. Namun yang paling mencolok adalah adanya atap yang dapat membuka-tutup hanya dalam waktu 20 detik saja.

Sedangkan bagian dapur pacu dipercaya 2.5 liter enam silinder segaris yang dapat menghasilkan tenaga 204 hp. Tenaga ini dialirkan melalui enam tingkat kecepatan yang diatur secara otomatis. BMW menyediakan pula varian 3.0 liter yang mampu memproduksi 258 hp, dengan torsi maksimum 228 lb-ft.

Bila dirasa kurang bertenaga, silakan pilih yang memiliki kapasitas mesin 3.0 liter twin turbo. Dapu pacu ini sanggup memproduksi tenaga hingga 306 hp, yang mampu berakselerasi 0-100 km/jam hanya dalam waktu 5,2 detik saja.

Interior Z4 dibuat bernuansa paduan hitam dan putih yang dilengkapi aksen kayu pada beberapa panel instrumennya. Terlihat sporti namun sangat nyaman untuk dikendaraai dalam waktu yang relatif lama. Rencananya BMW akan mulai memproduksi mobil ini pada 2010.

Monday, June 8, 2009

M.E.V Medical Equipment Vans





These vans are designed to carry mobile x-ray, scan and other large equipment.

Sunset Vans Inc. has been manufacturing transportation vehicles since 1975. We have always strived on quality, customization, safety and customer service. Every vehicle we build receives special treatment. All of our vehicles are built to meet or exceed the Americans with Disabilities Act (ADA).

Sunset Vans Inc. specializes in manufacturing dependable, and functional wheelchair vans, ADA Vans, paratransit vans, Shuttle Vans and gurney vans that are easy to operate and hold up against the rigorous demands that the transportation industry requires. Sunset strives to design its products with the highest standards in mind. Only top of the line commercial grade products are used. Attention to detail is shown from the DuPont painted reverse flange fiberglass roofs, to heavy duty Altro flooring with 10 year warranty, and high output AC and heat, Sunset designs appealing products that last. Sunset offers an easy to clean and aesthetically pleasing ABS interior kit. This interior kit is a great interior which not only looks great but is durable and will represent your company well.

The products we manufacture are of great value. Each vehicle is built with high quality craftsmanship and materials, yet we offer our vehicles at a lower price than most of the competition. In fact Sunset is so confident that if you were to ever find a lower price on the same conversion and vehicle, just send it to us and we will beat it.

The non-emergency medical transportation vehicles we design and manufacture will help aid in the productivity of commercial vehicle transportation companies, assisted living homes and hospitals.

mitsubushi fuso canter eco - d




Tidak dipungkiri, para pengunjung IIMS 2008 banyak tersedot perhatiannya pada truk konsep yang debutnya tampil di ajang Tokyo Motor Show 2007, Oktober tahun lalu ini. Canter Eco-D adalah kendaraan konsep komersial berbentuk dump truck yang pertama kali mengaplikasikan teknologi hybrid ke truk jenis light - duty dump. Dengan menggunakan tenaga elektrik, system hybrid Canter Eco-D mempunyai komponen utama yaitu 3-liter DOHC bermesin diesel (92kW), generator atau penggerak listrik ultra-slim (35kW), baterai lithium (Li)-ion berperforma tinggi, serta transmisi mekanis otomatis INOMAT-II.

Dengan sistem hybrid paralel, Canter Eco-D yang tenaga untuk menggerakan kendaraannya dihasilkan oleh motor elektrik, mesin diesel atau keduanya menjanjikan konsumsi bahan bakar yang ekonomis dan pengurangan emisi dengan performa yang bersih, halus dan tidak berisik.

Tidak hanya futuristik, tampilan Canter Eco-D mempunyai gaya desain tersendiri sesuai kebutuhan konsumen. Canter Eco-D memiliki jarak roda yaitu 3.350 mm dan sanggup mengangkut beban sampai dengan 3.000 kg. Untuk memudahkan pengoperasian, Canter-Eco-D juga dilengkapi dengan kabin jungkit otomatis.

i - real



Melanjutkan kesuksesan i-Unit dan i-Swing, produsen asal Jepang Toyota selanjutnya memperkenalkan personal mobility terbarunya bernama i-Real.

i-Real merupakan mobil konsep tiga roda keluaran Toyota, yang memiliki dua tingkat kecepatan yang berbeda yaitu low-speed dan high-speed. Kelebihan i-Real ketimbang pendahulunya, terlihat pada material bodi yang dipakainya yaitu plastik carbon fiber yang ringan. Selain itu, untuk bermanuver, kendaraan pribadi ini dilengkapi oleh kontrol operasi di salah satu bagian arm rest. Lebihnya, meskipun kendaraan ini hanya bisa digunakan untuk satu orang saja, namun kecepatannya mampu dilesatkan hingga 11 km/jam.

Roda belakang akan menjauhi roda depan atau merebah secara otomatis guna mendapatkan tingkat stabilitas yang optimal di kecepatan tinggi. Sebaliknya, di kecepatan lambat, roda akan mendekati roda depan sehingga memberikan kemudahan pada saat bermanuver.

i-Real yang presentasi pertamanya di IIMS 2008 dikendarai oleh artis Sandra Dewi, berhasil memukau pengunjung selama 10 hari gelarannya.

electric car (pininfarina)



Mobil ini adalah mobil listrik yang didisain oleh perusahaan desain mobil Pininfarina (Italia) dan perusahaan mobil Bolloré (Perancis).

B0 atau disebut juga Bluecar menggunakan baterai (LMP Battery) yang bisa diisi ulang dengan 2 cara yaitu melalui aliran listrik biasa atau dari panel surya yang terletak di bagian atapnya. B0 dapat berjalan sejauh 250 km dengan sekali isi ulang sedangkan untuk kecepatannya bisa mencapai 130 km/ jam, serta 0-100 km/ jam dalam waktu 6,3 detik.

Bila anda sedang tidak punya waktu lama untuk isi ulang, dengan meluangkan waktu selama beberapa menit saja, B0 sudah bisa dijalankan sejauh 30 km. Mobil B0 rencananya akan mulai antara tahun 2011 dan 2017 dengan perkiraan jumlah produksi sekitar 60.000 unit di tahun 2015.

Bluecar memiliki panjang 3,65 meter (atau sekitar 12 kaki), lebar 1,72 meter (sekitar 5,6 kaki), dan tinggi 1,6 meter (5,25 kaki).

Mobil ini rencananya hanya akan dipasarakan di enam negara terlebih dahulu, seperti Prancis, Italia, Jerman, Inggris, Spanyol, dan Swiss. Mobil ini juga akan dijual di Amerika Serikat (AS) tapi tidak dalam waktu dekat namun dalam beberapa tahun mendatang.

Mobil ini pun juga sudah bisa dipesan oleh masyarakat di negara-negara tersebut. Konsumen tinggal membayar uang muka 300 poundsterling atau sekitar Rp 5,4 juta tiap bulannya selama satu tahun maka pemesan pertama akan memiliki mobil ini dalam waktu 12 bulan mendatang.

Wednesday, June 3, 2009

tokyo ( robot pembantu )




TOKYO - Mimpi memiliki pembantu robot nampaknya segera terealisasi. Toyota Motor Corp bekerjasama dengan Universitas Tokyo baru-baru ini mendemonstrasikan robot humanoid yang dapat melakukan pekerjaan rumah tangga.

Seperti diberitakan Japan Times, Senin (27/10/2008), dalam demo akhir pekan lalu, robot tersebut mampu membersihkan ruangan, mengambil dan meletakkan makanan di atas meja, serta membawa pakaian kotor dan memasukkannya ke dalam mesin cuci. Robot juga dapat membedakan obyek yang dihadapinya, seperti furniture, alat-alat pembersih, dan lainnya.

Hebatnya robot dengan tinggi 155 cm dan bobot 130 kg tersebut juga dapat menganalisa pekerjaannya yang telah dilakukan. Sehingga jika ada kesalahan dalam menunaikan tugas, dia dapat memperbaikinya di pekerjaan selanjutnya. Sehingga robot tak akan mengulangi kesalahan yang sama.

Pihak Toyota dan Information and Robot Technology Research Initiative Tokyo University menyatakan, robot ini didesain untuk membantu meringankan tugas-tugas rumah tangga, terutama kalangan lanjut usia dan catat fisik.

Kedua pihak juga menyatakan, pengembangan masih terus dilakukan untuk menambah pekerjaan yang dapat dilakukan robot. Mereka memprediksikan, robot ini bisa mulai dipasarkan dalam tujuh tahun ke depan.

Robot dilengkapi dengan lima kamera serta sensor yang menggunakan laser di kedua kaki untuk membantu berjalan dan menghindari rintangan.

DARPA - MEMS robot bugs



Vanessa Alarcon saw them while working at an antiwar rally in Lafayette Square last month.
[an error occurred while processing this directive]

"I heard someone say, 'Oh my god, look at those,' " the college senior from New York recalled. "I look up and I'm like, 'What the hell is that?' They looked kind of like dragonflies or little helicopters. But I mean, those are not insects."

Out in the crowd, Bernard Crane saw them, too.

"I'd never seen anything like it in my life," the Washington lawyer said. "They were large for dragonflies. I thought, 'Is that mechanical, or is that alive?' "

That is just one of the questions hovering over a handful of similar sightings at political events in Washington and New York. Some suspect the insectlike drones are high-tech surveillance tools, perhaps deployed by the Department of Homeland Security.

Others think they are, well, dragonflies -- an ancient order of insects that even biologists concede look about as robotic as a living creature can look.

No agency admits to having deployed insect-size spy drones. But a number of U.S. government and private entities acknowledge they are trying. Some federally funded teams are even growing live insects with computer chips in them, with the goal of mounting spyware on their bodies and controlling their flight muscles remotely.

The robobugs could follow suspects, guide missiles to targets or navigate the crannies of collapsed buildings to find survivors.

The technical challenges of creating robotic insects are daunting, and most experts doubt that fully working models exist yet.

"If you find something, let me know," said Gary Anderson of the Defense Department's Rapid Reaction Technology Office.

But the CIA secretly developed a simple dragonfly snooper as long ago as the 1970s. And given recent advances, even skeptics say there is always a chance that some agency has quietly managed to make something operational.

"America can be pretty sneaky," said Tom Ehrhard, a retired Air Force colonel and expert in unmanned aerial vehicles who is now at the Center for Strategic and Budgetary Assessments, a nonprofit Washington-based research institute.

Robotic fliers have been used by the military since World War II, but in the past decade their numbers and level of sophistication have increased enormously. Defense Department documents describe nearly 100 different models in use today, some as tiny as birds, and some the size of small planes.
[an error occurred while processing this directive]

All told, the nation's fleet of flying robots logged more than 160,000 flight hours last year -- a more than fourfold increase since 2003. A recent report by the U.S. Army Command and General Staff College warned that if traffic rules are not clarified soon, the glut of unmanned vehicles "could render military airspace chaotic and potentially dangerous."

But getting from bird size to bug size is not a simple matter of making everything smaller.

"You can't make a conventional robot of metal and ball bearings and just shrink the design down," said Ronald Fearing, a roboticist at the University of California at Berkeley. For one thing, the rules of aerodynamics change at very tiny scales and require wings that flap in precise ways -- a huge engineering challenge.

Only recently have scientists come to understand how insects fly -- a biomechanical feat that, despite the evidence before scientists' eyes, was for decades deemed "theoretically impossible." Just last month, researchers at Cornell University published a physics paper clarifying how dragonflies adjust the relative motions of their front and rear wings to save energy while hovering.
ad_icon

That kind of finding is important to roboticists because flapping fliers tend to be energy hogs, and batteries are heavy.

The CIA was among the earliest to tackle the problem. The "insectothopter," developed by the agency's Office of Research and Development 30 years ago, looked just like a dragonfly and contained a tiny gasoline engine to make the four wings flap. It flew but was ultimately declared a failure because it could not handle crosswinds.

Agency spokesman George Little said he could not talk about what the CIA may have done since then. The Office of the Director of National Intelligence, the Department of Homeland Security and the Secret Service also declined to discuss the topic.

Only the FBI offered a declarative denial. "We don't have anything like that," a spokesman said.

The Defense Department is trying, though.

In one approach, researchers funded by the Defense Advanced Research Projects Agency (DARPA) are inserting computer chips into moth pupae -- the intermediate stage between a caterpillar and a flying adult -- and hatching them into healthy "cyborg moths."

The Hybrid Insect Micro-Electro-Mechanical Systems project aims to create literal shutterbugs -- camera-toting insects whose nerves have grown into their internal silicon chip so that wranglers can control their activities. DARPA researchers are also raising cyborg beetles with power for various instruments to be generated by their muscles.


"You might recall that Gandalf the friendly wizard in the recent classic 'Lord of the Rings' used a moth to call in air support," DARPA program manager Amit Lal said at a symposium in August. Today, he said, "this science fiction vision is within the realm of reality."
[an error occurred while processing this directive]

A DARPA spokeswoman denied a reporter's request to interview Lal or others on the project.

The cyborg insect project has its share of doubters.

"I'll be seriously dead before that program deploys," said vice admiral Joe Dyer, former commander of the Naval Air Systems Command, now at iRobot in Burlington, Mass., which makes household and military robots.

By contrast, fully mechanical micro-fliers are advancing quickly.

Researchers at the California Institute of Technology have made a "microbat ornithopter" that flies freely and fits in the palm of one's hand. A Vanderbilt University team has made a similar device.

With their sail-like wings, neither of those would be mistaken for insects. In July, however, a Harvard University team got a truly fly-like robot airborne, its synthetic wings buzzing at 120 beats per second.

"It showed that we can manufacture the articulated, high-speed structures that you need to re-create the complex wing motions that insects produce," said team leader Robert Wood.
ad_icon

The fly's vanishingly thin materials were machined with lasers, then folded into three-dimensional form "like a micro-origami," he said. Alternating electric fields make the wings flap. The whole thing weighs just 65 milligrams, or a little more than the plastic head of a push pin.

Still, it can fly only while attached to a threadlike tether that supplies power, evidence that significant hurdles remain.

In August, at the International Symposium on Flying Insects and Robots, held in Switzerland, Japanese researchers introduced radio-controlled fliers with four-inch wingspans that resemble hawk moths. Those who watch them fly, its creator wrote in the program, "feel something of 'living souls.' "

Others, taking a tip from the CIA, are making fliers that run on chemical fuels instead of batteries. The "entomopter," in early stages of development at the Georgia Institute of Technology and resembling a toy plane more than a bug, converts liquid fuel into a hot gas, which powers four flapping wings and ancillary equipment.

"You can get more energy out of a drop of gasoline than out of a battery the size of a drop of gasoline," said team leader Robert Michelson.

Even if the technical hurdles are overcome, insect-size fliers will always be risky investments.

"They can get eaten by a bird, they can get caught in a spider web," said Fearing of Berkeley. "No matter how smart you are -- you can put a Pentium in there -- if a bird comes at you at 30 miles per hour there's nothing you can do about it."

Protesters might even nab one with a net -- one of many reasons why Ehrhard, the former Air Force colonel, and other experts said they doubted that the hovering bugs spotted in Washington were spies.

So what was seen by Crane, Alarcon and a handful of others at the D.C. march -- and as far back as 2004, during the Republican National Convention in New York, when one observant but perhaps paranoid peace-march participant described on the Web "a jet-black dragonfly hovering about 10 feet off the ground, precisely in the middle of 7th avenue . . . watching us"?

They probably saw dragonflies, said Jerry Louton, an entomologist at the National Museum of Natural History. Washington is home to some large, spectacularly adorned dragonflies that "can knock your socks off," he said.

At the same time, he added, some details do not make sense. Three people at the D.C. event independently described a row of spheres, the size of small berries, attached along the tails of the big dragonflies -- an accoutrement that Louton could not explain. And all reported seeing at least three maneuvering in unison.

"Dragonflies never fly in a pack," he said.

Mara Verheyden-Hilliard of the Partnership for Civil Justice said her group is investigating witness reports and has filed Freedom of Information Act requests with several federal agencies. If such devices are being used to spy on political activists, she said, "it would be a significant violation of people's civil rights."

For many roboticists still struggling to get off the ground, however, that concern -- and their technology's potential role -- seems superfluous.

"I don't want people to get paranoid, but what can I say?" Fearing said. "Cellphone cameras are already everywhere. It's not that much different."

new technology



Science Daily — University of Utah physicists developed small devices that turn heat into sound and then into electricity. The technology holds promise for changing waste heat into electricity, harnessing solar energy and cooling computers and radars.

University of Utah physicist Orest Symko demonstrates how heat can be converted into sound by using a blowtorch to heat a metallic screen inside a plastic tube, which then produces a loud tone, similar to when air is blown into a flute. Symko and his students are developing much smaller devices that not only convert heat to sound, but then use the sound to generate electricity. The devices may be used to cool electronics, harness solar energy in a new way, and conserve energy by changing waste heat into electric power. Credit: (Credit: Image courtesy of University of Utah)

"We are converting waste heat to electricity in an efficient, simple way by using sound," says Orest Symko, a University of Utah physics professor who leads the effort. "It is a new source of renewable energy from waste heat."

Five of Symko's doctoral students recently devised methods to improve the efficiency of acoustic heat-engine devices to turn heat into electricity. They will present their findings on Friday, June 8 during the annual meeting of the Acoustical Society of America at the Hilton Salt Lake City Center hotel.

Symko plans to test the devices within a year to produce electricity from waste heat at a military radar facility and at the university's hot-water-generating plant.

The research is funded by the U.S. Army, which is interested in "taking care of waste heat from radar, and also producing a portable source of electrical energy which you can use in the battlefield to run electronics" he says.

Symko expects the devices could be used within two years as an alternative to photovoltaic cells for converting sunlight into electricity. The heat engines also could be used to cool laptop and other computers that generate more heat as their electronics grow more complex. And Symko foresees using the devices to generate electricity from heat that now is released from nuclear power plant cooling towers.

How to Get Power from Heat and Sound

Symko's work on converting heat into electricity via sound stems from his ongoing research to develop tiny thermoacoustic refrigerators for cooling electronics.

In 2005, he began a five-year heat-sound-electricity conversion research project named Thermal Acoustic Piezo Energy Conversion (TAPEC). Symko works with collaborators at Washington State University and the University of Mississippi.

The project has received $2 million in funding during the past two years, and Symko hopes it will grow as small heat-sound-electricity devices shrink further so they can be incorporated in micromachines (known as microelectromechanical systems, or MEMS) for use in cooling computers and other electronic devices such as amplifiers.

Using sound to convert heat into electricity has two key steps. Symko and colleagues developed various new heat engines (technically called "thermoacoustic prime movers") to accomplish the first step: convert heat into sound.

Then they convert the sound into electricity using existing technology: "piezoelectric" devices that are squeezed in response to pressure, including sound waves, and change that pressure into electrical current. "Piezo" means pressure or squeezing.

Most of the heat-to-electricity acoustic devices built in Symko's laboratory are housed in cylinder-shaped "resonators" that fit in the palm of your hand. Each cylinder, or resonator, contains a "stack" of material with a large surface area -- such as metal or plastic plates, or fibers made of glass, cotton or steel wool -- placed between a cold heat exchanger and a hot heat exchanger.

When heat is applied -- with matches, a blowtorch or a heating element -- the heat builds to a threshold. Then the hot, moving air produces sound at a single frequency, similar to air blown into a flute.

"You have heat, which is so disorderly and chaotic, and all of a sudden you have sound coming out at one frequency," Symko says.

Then the sound waves squeeze the piezoelectric device, producing an electrical voltage. Symko says it's similar to what happens if you hit a nerve in your elbow, producing a painful electrical nerve impulse.

Longer resonator cylinders produce lower tones, while shorter tubes produce higher-pitched tones.

Devices that convert heat to sound and then to electricity lack moving parts, so such devices will require little maintenance and last a long time. They do not need to be built as precisely as, say, pistons in an engine, which loses efficiency as the pistons wear.

Symko says the devices won't create noise pollution. First, as smaller devices are developed, they will convert heat to ultrasonic frequencies people cannot hear. Second, sound volume goes down as it is converted to electricity. Finally, "it's easy to contain the noise by putting a sound absorber around the device," he says.

Studies Improve Efficiency of Acoustic Conversion of Heat to Electricity

Here are summaries of the studies by Symko's doctoral students:

-- Student Bonnie McLaughlin showed it was possible to double the efficiency of converting heat into sound by optimizing the geometry and insulation of the acoustic resonator and by injecting heat directly into the hot heat exchanger.

She built cylindrical devices 1.5 inches long and a half-inch wide, and worked to improve how much heat was converted to sound rather than escaping. As little as a 90-degree Fahrenheit temperature difference between hot and cold heat exchangers produced sound. Some devices produced sound at 135 decibels -- as loud as a jackhammer.

-- Student Nick Webb showed that by pressurizing the air in a similar-sized resonator, it was able to produce more sound, and thus more electricity.

He also showed that by increasing air pressure, a smaller temperature difference between heat exchangers is needed for heat to begin converting into sound. That makes it practical to use the acoustic devices to cool laptop computers and other electronics that emit relatively small amounts of waste heat, Symko says.

-- Numerous heat-to-sound-to-electricity devices will be needed to harness solar power or to cool large, industrial sources of waste heat. Student Brenna Gillman learned how to get the devices -- mounted together to form an array -- to work together.

For an array to efficiently convert heat to sound and electricity, its individual devices must be "coupled" to produce the same frequency of sound and vibrate in sync.

Gillman used various metals to build supports to hold five of the devices at once. She found the devices could be synchronized if a support was made of a less dense metal such as aluminum and, more important, if the ratio of the support's weight to the array's total weight fell within a specific range. The devices could be synchronized even better if they were "coupled" when their sound waves interacted in an air cavity in the support.

-- Student Ivan Rodriguez used a different approach in building an acoustic device to convert heat to electricity. Instead of a cylinder, he built a resonator from a quarter-inch-diameter hollow steel tube bent to form a ring about 1.3 inches across.

In cylinder-shaped resonators, sound waves bounce against the ends of the cylinder. But when heat is applied to Rodriguez's ring-shaped resonator, sound waves keep circling through the device with nothing to reflect them.

Symko says the ring-shaped device is twice as efficient as cylindrical devices in converting heat into sound and electricity. That is because the pressure and speed of air in the ring-shaped device are always in sync, unlike in cylinder-shaped devices.

-- Student Myra Flitcroft designed a cylinder-shaped heat engine one-third the size of the other devices. It is less than half as wide as a penny, producing a much higher pitch than the other resonators. When heated, the device generated sound at 120 decibels -- the level produced by a siren or a rock concert.

"It's an extremely small thermoacoustic device -- one of the smallest built -- and it opens the way for producing them in an array," Symko says.

aero civic





It might look ugly but this 1992 Honda Civic has double the fuel mileage of a standard Civic simply by lowering the coefficient of drag (Cd) from 0.34 to 0.17 with a little engineering savvy and $400 worth of material bought the local hardware store. In fact the drag on this 350,000 miles (563,270 km) old Civic has been reduced to the point where it is virtually equal to the radical tear drop shaped Aptera which has a Cd of 0.15.

The car's builder Mike Turner says at a highway speed of 65 mph (105 km/h) he can routinely achieve a fuel mileage of 95 MPG (2.5Lt per 100km). The most obvious feature are the wheel covers and Boat Tail which were modeled on a Vintage German 1939 Maybach. The extended tail eliminates the recirculating, low-pressure eddy that forms behind "normal" cars and that act to slow them down. More subtle but just as important additions have been a fully enclosed undertray, the removal of wing mirrors and blocking intake vents at the front of the car and exhausting the radiator air out through the front wheel wells.

Using coast down tests and a SuperMID fuel consumption computer Mike’s next target is to improve mileage during night driving as he has calculated the electrical load from the lights are costing him 2 to 3 mpg with half of this loss being from the parking lights. Mike wants to replace the parking and dome lights with LED's. Check out the Aero Civic web site.